High power models extend programmable TDK-Lambda DC supply range

High power models extend programmable TDK-Lambda DC supply range

High power GSP models added to the TDK‑Lambda Genesys+ series of programmable DC power supplies will be highlighted at this year’s Southern Manufacturing & Electronics show.

The 2U high 10kW and 3U high 15kW models have with output voltages and currents of up to 0 to 10V/1,500A to 0 to 600V/25.5A. The power supplies address a broad market range, including component, aerospace and automotive testing, semiconductor fabrication, water treatment, plating and solar array simulation.

The 20 new high power models can be programmed to operate in constant voltage, constant current or constant power modes and can also simulate an internal resistance for battery charging and long output cable voltage drop applications. The units are available for use with three phase 170 to 265, 342 to 460 or 342 to 528V AC inputs. Efficiencies are up to 92%.

All models feature an LCD with user controllable brightness and dimming functions for extended life. Faster up and down programming response times have user adjustable voltage and current slew rate control. Two user programmable output open drain control pins can be used to activate external devices like load disconnect relays.

Arbitrary waveform profiles, such as car battery simulation at vehicle start up, of up to 100 steps can be generated and stored in four memory cells. These can be activated by commands from the communication ports or the front panel controls, allowing the user to quickly switch between programs.

All functions can be programmed via the front panel or remotely using the LAN (LXI 1.5), USB 2.0 or RS232/485 communications interfaces, which are provided as standard.

Visit TDK-Lambda UK on stand B180 or find out more at www.uk.tdk-lambda.com

Blog Footer